Ok so this is my interpretation of EIGRP ADVANCE TECH LAB, Infact I have re-written the tasks description down in my own words. I found this approach to be the best, as during the lab we have apple of paper and coloured pencils/pens to work with.
What follows below are the tasks list and command references for the same.
Task 1) Command reference:
conf t
router eigrp <asn>
no auto-summary
network <network no> <wld mask>
end
Task 2)Command reference:
interface serial 3/0
(config-if)#ip hello-interval eigrp 10 20
(config-if)#ip hold-time eigrp 10 80
T3)Command reference:
router eigrp 100
(config-router)#metric weights 0 1 0 0 0 0
T4)Command reference:
router eigrp 100
(config-router)#metric weights 0 0 0 1 0 0
T5)Command reference:
We need to make use of LEAK-MAP,LEAK-MAPS are available along with the summary command. The way leak maps work are highlighted below,
| LEAK_MAP | ROUTE_MAP | ACL | RESULT |
| Yes | No | No | Only Sum |
| Yes | Yes | No | Sum + All |
| Yes | Yes | Yes | Sum + ACL Match |
R1(config-subif)#ip summary-address eigrp 300 1.1.0.0 255.255.252.0 leak-map R1->R2
T6)Command reference:
R4(config)#router eigrp 400
R4(config-router)#variance 3
R4(config-router)#end
T7)Command reference:
R1(config)#router eigrp 300
R1(config-router)#timers active-time disabled
R1(config-router)#exit
R1(config)#router eigrp 100
R1(config-router)#timers active-time 60
T8)Command reference:
R4(config)#int s 1/0.14
R4(config-subif)#ip authentication mode eigrp 300 md5
R4(config-subif)# ip authentication key-chain eigrp 300 AUTH_R1R4
R4(config-subif)#exit
R4(config)#key chain AUTH_R1R4
R4(config-keychain)# key 1
R4(config-keychain-key)# key-string Cisco14
R4(config-keychain-key)#end
T9)Command reference:
BB2(config)#router eigrp 200
BB2(config-router)#metric maximum-hops 110
BB2(config-router)#end
T10)Command reference:
R2(config)#router eigrp 200
R2(config-router)#distance eigrp 95 138
R2(config-router)#end
T11)Command reference:
BB2(config)#int e 0/0
BB2(config-if)#ip bandwidth-percent eigrp 200 30
BB2(config-if)#end
T12)Command reference:
BB1(config)#int e 0/0
BB1(config-if)#bandwidth 30000
BB1(config-if)#end
T13)Command reference:
BB1(config)#router eigrp 100
BB1(config-router)#eigrp stub receive-only
BB1(config-router)#end
T14)Command reference:
BB2(config)#interface loopback 1
BB2(config-if)#ip address 151.1.112.112 255.255.255.0
BB2(config-if)#exit
BB2(config)#router eigrp 200
BB2(config-router)#redistribute connected route-map LOOP1
BB2(config)#route-map LOOP1
BB2(config-route-map)#match interface loopback 1
BB2(config-route-map)#end
T15)Command reference:
BB2(config)#ip route 160.1.112.0 255.255.255.0 null 0
BB2(config)#router eigrp 200
BB2(config-router)#redistribute static route-map STATIC
BB2(config-router)#default-metric 1500 20000 255 1 1500
BB2(config-router)#exit
BB2(config)#route-map STATIC
BB2(config-route-map)#match ip address 1
BB2(config-route-map)#exit
BB2(config)#access-list 1 permit 160.1.112.0 0.0.0.255
BB2(config)#exit
T16)Command reference:
BB2(config)#router eigrp 200
BB2(config-router)#eigrp stub static connected
BB2(config-router)#end
T17)Command reference:
R5(config)#router eigrp 400
R5(config-router)#no eigrp log-neighbor-changes
R5(config-router)#end
T18)Command reference:
R6(config)#router eigrp 400
R6(config-router)#eigrp log-neighbor-warnings 300
R6(config-router)#end
T19)Command reference:
R3(config)#router eigrp 300
R3(config-router)#offset-list 0 in 50 serial 1/0.13
R3(config-router)#end
